I mean the whole family of it: CNC routers, CNC mills, laser cutters, 3D printers, and the growing collection of hybrid tools marketed with just enough nostalgia to sound more authentic than they are. If software is controlling the cut path, the feed rate, the angle, the depth, or the motion, then the machine is performing most of the shaping operation, even if the maker is still doing the design, setup, calibration, troubleshooting, material selection, assembly, and finishing. Those are real skills. They matter. But they are not identical to forming the material directly by hand. Dictionary definitions still tie “handmade” and “handcrafted” to being made by hand or by a hand process, which is exactly why the distinction continues to matter.

That distinction is not petty. It is descriptive.

It is the difference between guiding a blade by feel and programming a toolpath for a motor to follow. It is the difference between carving a curve by eye and telling a machine exactly where that curve begins and ends. Both require knowledge. Both can produce beautiful work. Both can go wrong in expensive and creative ways. But they are not the same process, and pretending otherwise does not elevate craft. It blurs it.

Digital fabrication is still craft.

It demands design judgment, patience, troubleshooting, process knowledge, and a tolerance for mechanical betrayal at inconvenient hours. Anyone who has snapped a bit, scorched a board, lost a print, ruined alignment, or watched a project fail ninety percent of the way through knows there is no magic button. But there is still a meaningful difference between craft in which the maker directly forms the object and craft in which the maker directs a machine that substantially executes the shaping. That distinction is not a moral hierarchy. It is an honesty hierarchy.

That is where the marketplace has made a mess of things.

“Handmade.”

“Handcrafted.”

“Artisan.”

Those words used to tell you something useful about the nature of the labor. Now they are often used so broadly that they tell you almost nothing. The problem is not imaginary. Etsy’s current creativity standards explicitly allow items produced with computerized tools such as laser printers, 3D printers, CNC machines, and Cricut machines when they are based on the seller’s original design. Amazon Handmade, meanwhile, uses a more subdivided system that separates hand-altered, hand-designed, handcrafted, repurposed, and upcycled items, and describes “handcrafted” as made by hand using raw materials. So even among major marketplaces, the vocabulary is not consistent. The same word can mean different things depending on where the customer encounters it.

And once the language gets foggy, price gets foggy right behind it.

Customers lose the vocabulary to understand what they are buying. A maker who bandsaws, planes, carves, sands, and finishes by hand has a harder time explaining why the piece costs more than something whose form was largely machine-cut and then hand-finished. At the same time, digital makers lose the opportunity to explain the real value of what they actually do: design fluency, software knowledge, machine setup, repeatability, precision, and finishing skill. Everybody loses because the language got lazy.

That matters not just aesthetically, but commercially. The FTC’s general rule for advertising claims is not that every term has a single government-issued definition. It is that claims should be truthful and substantiated rather than misleading. In that sense, this is not merely a shop-floor gripe. It is a labeling and transparency problem. If the language invites customers to picture one process while the product was made through another, the seller may still be describing real effort, but not necessarily in the clearest possible way.

Now, in the interest of full transparency, let me admit something before anyone accuses me of being a purist with a superiority complex:

There is a Genmitsu 3018 sitting on my own workbench right now.

It is not yet fully configured, but when it is, I fully expect I will use it for the sort of work machines excel at: repeatable operations, lettering, signage, templates, jigs, and other tasks where precision and consistency matter more than romanticism.

Technology is not the enemy.

Efficiency is not a moral failing.

But when that machine starts doing the shaping for me, I will not pretend otherwise.

I am not ready to give up small-batch hand-crafted work just yet. I still believe there is value, both practical and philosophical, in shaping material directly, in feeling the grain fight back, in making judgment calls by eye instead of by software. There is something different about work that passes through the maker’s hands at every stage, and I suspect many customers still recognize that difference even when they cannot always articulate it.

But I am not naïve enough to pretend technology has no place in a modern shop.

It does.

It already has.

It will continue to.

My objection is not to using machines.

My objection is to erasing the distinction between using a machine and doing the shaping by hand.

A CNC-made piece can be excellent.

A laser-cut piece can be beautiful.

A 3D-printed piece can be ingenious.

But if we want customers to understand what they are buying, and why one item costs more than another, then we owe them language that describes the process honestly.

Use the machine.

Use the software.

Use every modern advantage available.

Just call it what it is.

Because craft is not diminished by technology; only by misrepresentation.